Skip to main content
The Puerta Corrediza - 2 Hoja is a two-panel sliding door where both leaves travel along a shared top rail. The panels slide in opposite directions so that the full opening is revealed when both are parked against the adjacent wall sections. Livewire component: puertas.corrediza2hoja
This component is a stub and has not yet been implemented. The current source renders only a placeholder text label. No inputs, calculations, or fabrication summary are available.

​
Planned behaviour

Based on the system description in the door selector (“2 Hojas móviles con guiado lineal”), the completed component will work as follows:
  • Two equal-width leaves share a single top rail
  • Each leaf slides in opposite directions (one left, one right) to open the passage
  • The total frame width is split equally between the two leaves
  • Both leaves require their own set of frame profiles, glass panels, and roller hardware

​
Planned features

When fully implemented, this component is expected to include:

Dimension inputs

Overall frame width and height entries, with the leaf width derived automatically as half the clear opening.

Rail profile

Top and bottom rail cut lengths calculated from the total frame width.

Leaf profiles

Frame profiles for both leaves — vertical stiles and horizontal rails — calculated from the individual leaf dimensions.

Glass panels

Two glass sizes, one per leaf, with standard clearance deductions applied.

Roller hardware

Roller and guide hardware quantities for both leaves.

Fabrication summary

Full cut list and accessory list ready for printing.

Build docs developers (and LLMs) love

Get started for freeTalk to us